Mechanical clutch friction plate - for Giulietta / Giulia 750-101 & early 105 series
Mechanical clutch friction plate to fit 750, 101 and early 105 series cars.
Active filters
Mechanical clutch friction plate to fit 750, 101 and early 105 series cars.
Mechanical clutch pressure plate to fit 750, 101 and early 105 series cars.
Genuine Fitchel & Sachs mechanical/cable clutch friction plate to fit 750, 101 and early 105 series cars.
Genuine Fitchel & Sachs mechanical/cable clutch release bearing to fit the clutches of 750, 101 and 105 series cars.
Retaining clip needed to fit the newer-design clutch release bearing (ref. CL013) on all cars with a mechanical clutch. Two clips per car.
Release bearing adaptor for 750/101 and 105 cars. This adaptor is designed to allow a 1750/2000 engine and clutch to be used in 750, 101 and 105 models with a mechanical clutch. The car retains the...
Mechanical/cable clutch release bearing to fit the clutches of 750, 101 and early 105 series cars. Original design
Retaining clip required for fitting the clutch release bearing.
Bush for the bottom of the clutch pedal arms on 750 and 101 series cars. Dimensions OD - 20 mm, ID - 8 mm, width - 19 mm. May require slight trimming to fit some pedal arms.
Clutch pedal return spring, will fit all 750 and 101 series cars.
Mechanical/cable clutch kit suitable for all mechanical clutch cars; it replaces the conventional mechanical clutch. Features an uprated F&S pressure plate and release bearing and a...
FAST ROAD mechanical/cable clutch kit suitable for all mechanical clutch cars; it replaces the conventional mechanical clutch. Features an uprated F&S pressure plate and release bearing and a...
Oil filler plug to fit the gearbox and differential of 750, 101 and 105 series cars. Also fits Montreal differentials. Uses a 14 mm Allen key.
Tab washer to fit the rear of the gearbox mainshaft on all 101 series 5-speed gearboxes and 105 series 5-speed boxes up to approximately 1972. Due to gearbox interchangeability, you may find this...
1.85M long. Used as the speedometer cable on LHD cars and as the rev counter/tacho cable on RHD cars. Fits all 750, 101, 105 series cars. Check the length of your old cable!
Speedometer cable for all right-hand drive 105 series cars. 2.0 m long, it will also fit 750 and 101 series cars if required.
Rev counter/tacho cable for left-hand drive 105 series cars. At 1.55 m long, it will also fit some 750 and 101 series cars.
Layshaft rear bearing to fit 105 series mechanical clutch cars. Also fits 5-speed 101 series, late 102 series and all 2600s (106 series). Outside diameter - 62mm Inside diameter - 30 mm...
Layshaft intermediate bearing for 101 and 105 series gearboxes Also fits late 102 series and all 2600s (106 series).
Layshaft front bearing (inside diameter 25 mm, outside diameter 52 mm, width 20.6 mm) to fit mechanical clutch and some hydraulic 105 series gearboxes. Also fits 101 series, late 102 series and...
Mainshaft rear bearing to fit mechanical clutch cars. Inside diameter 25 mm, outside diameter 52 mm, width 15 mm.
Mainshaft front bearing to fit 105 series mechanical clutch cars. Also fits 101 series, late 102 series and all 2600s (106 series). Inside diameter 30 mm, outside diameter 62 mm, width 23.8 mm.
Input shaft needle roller bearing to fit all 101/105 gearboxes. Also fits late 102 series and all 2600s (106 series). Inside diameter 20 mm, OD 26 mm, width 17 mm.
Input shaft bearing for mechanical clutch cars (including 101 series) and early hydraulic clutch cars where the input shaft is retained by a circlip. Also fits late 102 series and all 2600s (106...
Internal gear bush for 1st to 4th gear on all 101/105 series gearboxes. Also fits late 102 series and all 2600s (106 series).
Rear gearbox oil seal for early 750 series cars with the Borg Warner "barrel box".
Rubber gear lever gaiter for the transmission on all 750 series cars. Fits over the transmission tunnel opening inside the car.
Rear gearbox oil seal for all 105 series gearboxes, both mechanical/cable and hydraulic clutch cars, as well as 101 and 106 series gearboxes.
Rear gearbox oil seal by Corteco, original equipment (OE) quality. Sold individually. Dimensions: 60 x 44 x 10 All 105 series gearboxes All 5-speed gearboxes of the 101 and 106 series
Lip-type oil seal fitted at the front of the gearbox. Sold individually. It is used on early Alfa Romeo Giulietta 750 series cars with the Borg Warner "barrel" gearbox. Size: 30 x 40 x 7.
Rubber plug for gearbox bellhousing. We understand this is only fitted to some 750 cars.
Bracket mounted on the gearbox, with rubber bush, from which the exhaust is hung. For 750 and 101 series cars, except Veloce and Berlina versions. Please compare with your original part before...
Large rubber seal/gasket fitting between the transmission tunnel pressing and the transmission tunnel opening cover (metal or plastic/foam versions) on most 105 series. Suits Sprint GT, GTV, GTC...
Gearbox rear mounting bush (48 mm diameter) to fit the 750 and early 101 four-speed gearbox.
Bolt for gearbox rear mounting bush. 750 & 101 cars.
Original-style gear lever knob - screw-on - as fitted to 750 series cars with Borg Warner gearbox.
Gear change detent ball on 101, 105, 116 and 75 models.
Differential carrier bearing for 750 series cars. 2 required per car.
Differential pinion outer (front) bearing to fit all 750 series cars. High-quality bearing.
Differential pinion inner (rear) bearing to fit all 750 series cars. High-quality bearing.
Differential pinion nut to fit all 105 series differentials from 1300 to 1750 as well as all 101 series differentials/rear axles
Lock washer, differential pinion nut. 1300-1750 axles.
Differential pinion nut tool, 1300-1750 type axles, including 750 and 101 series. ++ This tool is not suitable for use with an impact wrench/gun ++
Rear section handbrake cable to fit 750 and 101 series Spiders
Handbrake lever knob. Please note that the pilot hole has been drilled, but will need finishing by the customer to the correct pin diameter (it is made as a low-volume 3D-printed part).
Handbrake lever stop (buffer) for Alfa Romeo Giulietta and Giulia of the 750 and 101 series.
Front handbrake cable section to fit 750 series Spiders only. Short-wheelbase cars up to chassis #8000
Brass brake bleed screw, sold individually. It fits all drum brake wheel cylinders on Alfa Romeo 750 and 101 series cars. 3/8 UNF thread.
Rear brake cylinder seal kit to fit 101 series cars with 0.7" rear wheel cylinders and larger rear brake shoes. One kit does both rear brake cylinders.