Menu
Parts and workshop
for Italian vehicles
for Italian vehicles
Cylinder head
Cylinder head and timing parts for 750 and 101 engines: 750 series valves, guides, springs and cam followers, IWIS 1300 timing chains, head studs, OLIO oil filler caps and crankshaft pulley bolts.
Cylinder head There are 76 products.
Active filters
Valve collet 750 series
Valve collet for 750 series engines. Sold as a pair (two halves). 8 required per car.
€7.81
Tax included
OLIO oil filler cap - metal type
Oil filler cap - metal bayonet type, fits most Nord twin-cam engines and 2600 models.
€12.07
Tax included
Crankshaft front pulley bolt
Crankshaft front pulley bolt. Giulietta and Giulia 101 series
€65.62
Tax included
Crankshaft front pulley bolt lock tab
Crankshaft front pulley bolt lock tab. For 101 series cars
€11.36
Tax included
Cylinder head stud 1300 engine
Cylinder head stud for 1300cc 750/101 Series engines - 230mm long.
€24.90
Tax included
IWIS competition lower timing chain
Standard timing chains can stretch and wear under high load, with a consequent effect on engine performance. German-made Iwis competition timing chains are specially manufactured with highly...
€83.99
Tax included
Exhaust manifold nut
Exhaust manifold nut for 101, 105, 116 and 75 engines, including V6.
€1.67
Tax included
Exhaust/inlet manifold stud
34 mm exhaust/inlet manifold stud to fit all 101, 105, 116 4-cylinder engines
€2.18
Tax included
Valve spring set 750 series
Set of 8 valve springs (8 inner + 8 outer) for 750 series engines.
€260.44
Tax included
Cam followers 750 series engine
Set of 8 cam followers to fit 750 series engines.
€515.14
Tax included
Valve guide 750 series engine
Valve guide which can be adapted (requires shortening) to suit inlet or exhaust valves on 750 series engines with 8 mm valve stems.
€23.63
Tax included
Cylinder head flange nut 750 & 101 series
Cylinder head flange nut for early 750 and 101 series cars. Also occasionally found on some early 105s.
€8.75
Tax included
Chrome cylinder head nut 1300/1600
Chrome cylinder head nut for 1300 1600 engines.
€6.90
Tax included
Black cam cover retaining bolt
Bolt to secure the cam cover on all 101, 105 and 106 series twin-cam cars.
€17.40
Tax included
Performance camshaft 10.8mm
Lightweight hollow billet camshaft, 10.8 mm lift with 285 degrees duration at 0.30 mm tappet clearance (254 degrees at 1 mm lift). Designed by Jim Evans, UK Alfa competition engine builder whose...
€463.82
Tax included
Performance camshaft 11.2mm
Lightweight hollow billet camshaft, 11.2 mm lift with 284 degrees duration at 0.30 mm tappet clearance (253 degrees at 1 mm lift)
€463.82
Tax included
Cam cover washer set
Set of six "washers" (four fibre, two aluminium) for the cam/valve cover retaining bolts on all 101, 105, 116 and 75 engines (except Ts and V6).
€10.15
Tax included
Cam cover half-moon seals, pair
A pair of "half-moon" rubber seals for the rear of the camshaft housing at the back of the cylinder head on 105, 116 and 75 4-cylinder engines.
€3.41
Tax included
Lower valve spring seat washer
Valve spring lower cup washer. For 101, 105, 116, 75 4-cyl and TS engines
€13.13
Tax included
Exhaust valve guide 4-cylinder, not TS
Exhaust valve guide for all 101, 105, 116 and 75 4-cylinder engines, plus Montreal - with 9 mm valve stems.
€7.00
Tax included
Valve guide 4-cylinder, not TS
Inlet valve guide to fit all 101, 105, 116 and 75 4-cylinder engines - plus Montreal - with 9 mm valve stems.
€7.00
Tax included
Cam cover nut for 750 & 101 engines
Cam/valve cover nut to fit early 750 Veloce Series and Sprint Speciale engines.
€54.25
Tax included
Cam cover nut for 750, 1900 & 102
Cam/valve cover nut to fit 750 series, 1900 and 2000 102 series engines.
€63.00
Tax included
Cam follower, original equipment
The classic Alfa production cam follower fits all 101, 105, 116, Montreal and 75 4-cylinder engines, including TS and V6 (inlet side only).
€34.56
Tax included
Reproduction cam follower bucket
Reproduction cam follower for all 101, 105, 116, Montreal and 75 4-cylinder engines including TS and V6 (inlet side only).
€20.92
Tax included
Exhaust valve for 1600/1750
Exhaust valve - 1600/1750. High-quality Italian-made valve.
€16.62
Tax included
Inlet valve for 1600/1750
Inlet valve - 1600/1750. High-quality Italian-made valve.
€16.62
Tax included
Kent performance valve spring set
High-quality performance valve springs from the best British manufacturer.
€245.14
Tax included
Cam cover, black finish
An original cam cover for 101 series and GTA engines, professionally cleaned and finished in black crackle.
€393.42
Tax included
Cam cover, black finish, late type
An original 105 series cam cover (1970-78 version), professionally cleaned and finished in black crackle.
€393.42
Tax included
Colombo & Bariani camshafts 10.9mm
Colombo & Bariani have been manufacturing original and performance camshafts for cars and motorcycles for over 60 years.
€691.44
Tax included
Upper timing chain for 1300 engine
Upper timing chain to fit all 101 and 105 series 1300 engines.
€34.25
Tax included
Upper timing chain for 1600 engine
Upper timing chain to fit all 1600cc 101, 105, 116 and 75 engines.
€34.25
Tax included
