Cooling and heating circuit for 750 and 101 series: water pumps and gaskets, standard or inline thermostats, radiator hoses, radiator caps, heater tap, fresh air flaps and ducting for Sprint and Spider.
Active filters
Upper radiator hose to fit 750 and 101 series Normale cars, with the thermostat located in the manifold.
Lower radiator hose to fit all 750 and 101 series Spiders and Sprint Speciale.
Upper radiator hose to fit 750 and 101 series cars with the in-line thermostat.
Dashboard vent for 750 and 101 Spider cars.
110 cm long fresh air ducting hose (approx. 80 mm internal diameter) to fit 750 and 101 series Sprint Speciales and one side of some 101 series Spiders. Made in the correct rubberised fabric style...
80 mm diameter fresh air ducting hose. This part is approximately 60 cm long and is used on one side of the 101 Series 1600 Spider for fresh air ducting; it can also be used on other models.
80 mm diameter fresh air ducting hose to fit 750 and 101 series Spiders and Sprints. This one is approximately 80 cm long. Used on both sides of the car on Sprints and Spiders, except 101 1600...
Insert-style thermostat to fit all 101 series vehicles.
Water pump gasket for 101 and 105 series engines.
Polished stainless steel version of the early round-style radiator cap to fit 1600 Duetto, Step-front (up to 1970) and equivalent Giulia Berlina cars. Also fits 101 series cars (and possibly 750...
Round-style radiator cap for 1600 Duetto, Step-front cars (up to 1970) and equivalent Giulia Berlinas. Also fits 101 series cars (and possibly 750 series). Rated at 0.5 bar - 7.25 psi. Also used...
Original-style 35 mm diameter spiral heater duct hose to fit most 750 and 101 series cars. Sold in 1 metre lengths.
Heater tap to fit 750, 1900 and 101 series cars up to 1960, as well as many Ferraris, Maseratis and some Lamborghinis (inc. Muira) too!
Water pump gasket for 1300cc 750 & 101 Series engines, 1900 engines, 102 Series 2000 engines and 106 Series 2600 engines.
In-line tube-style thermostat to fit 750 and 101 series Veloce engines, also used on early 750 Normale cars.
Water pump (2 outlets) to fit 101 series 1600 engines and 105 series cars fitted with dynamos/generators.
Water pump fitted to 750 and early 101 series 1300 engines. Please compare the image with your original water pump before ordering, as Alfa Romeo had two variants of water pump, but only this type...
Water pump gasket fitted to 750 and 101 Series 1300 engines.
Water pump repair kit for 750 and 101 series 1300 cars
Small (13-20 mm) stainless steel hose clamp/jubilee clip for general use on heater hoses, etc.
Large (45-60 mm) stainless steel hose clamp to fit larger hoses such as the upper radiator hose at the inlet manifold joint on early 105 series cars.
Stainless steel hose clamp/jubilee clip for general use on coolant hoses, etc
Medium (25-35 mm) stainless steel hose clamp/jubilee clip for general use on heater hoses, etc.
Set of 25 original-style hose clamps (9 mm wide band) as used on Alfas (and Ferraris, Maseratis and other Italian cars) in the 1950s and 1960s.
A. Salamini & Co. radiator sticker, measuring 52 mm X 21 mm (at the centre)
Dynamo belt 10x725mm - Alfa Romeo 105 series series 1 - 1300 - 1600 101 series - alternator 145-146 - 155 1.9TD*
Instructions for use: When the pump is fitted with sealing compound, please wait approximately 1 hour, with the cooling system empty. Check that the hose clips are in good condition, as well as...
