Fuel system for 750 and 101 series: Weber 40 DCO3 and 36 DCD carburettors, Weber and Solex rebuild kits, carburettor gaskets and mountings, fuel pump overhaul kit, blanking plates and Giulietta fuel tank sender.
Active filters
Fuel tank sender unit for 750 and 101 series cars.
Fuel pump overhaul kit for 750 series cars. Cars with cylinder head-mounted Fispa pump.
Spindle for Weber 40 DCO3 carburettor. Originally fitted to 750 Veloce cars.
Complete overhaul kit for the Weber 40 DCO3 carburettor. Originally fitted to 750 veloce cars. The kit contains: Needle valve size 175. Top cover gasket. Jet cover gasket. Base gaskets. Washers. 3...
Complete overhaul kit for the Solex APAI-G downdraught carburettor fitted to some 750 and 101 series "Normale" cars.
Complete carburettor overhaul kit to fit the Solex 32 PAIA downdraught as fitted to Normale cars from the late 1950s.
Rubber carburettor mounts to fit 750 series Veloce engines.
Gasket fitting between the engine block and the angled fuel pump mounting on 101 & 105 models
Aluminium blanking plate to blank off the mechanical fuel pump mounting on 101 and 105 series cars with cartridge oil filter.
Aluminium blanking plate to seal the mechanical fuel pump mounting on carburettor-equipped 101, 105, 116 and 75 models.
Plastic mounting spacer to suit mechanical fuel pumps mounted on the engine front timing cover.
Air intake hose for 101 Series 1600 Spider Normale cars. 60 mm diameter and 310 mm long. Sold individually - two required per car.
Fuel sender cover to fit the boot floor of the Giulietta/Giulia Sprint & Spider 750 & 101.
Single-carburettor air box strap. fitted to 750 and 101 cars.
Adaptor plate to allow a standard air filter housing to be fitted. ** SUITABLE FOR 101 GIULIA ONLY ** IF FITTED TO A 1300 CAR, YOU MAY HAVE CLEARANCE PROBLEMS WITH THE BONNET.
New genuine Weber 36 DCD Type 14 downdraught carburettor. A popular replacement for the Solex carburettor originally fitted to 750 & 101 Series Normale and 105 Giulia Ti cars.
Air filter to carburettor air intake plenum hose/elbow to fit Veloce cars.
Bush for the bottom of the carburettor support arm on 750 and 101 series Veloce cars.
New metal fuel tank support strap to fit all 750 and 101 series cars. End-to-end length, 785 mm. Sold individually, two used per car. Not suitable for SS and Spider Veloce models.
Pair of original-style felt strips to fit between the fuel tank and the support straps on all 750 and 101 series cars.
New-production fuel tank to suit 750 and 101 series Spiders. Well remade in stainless steel with correct-style outlets.
Complete carburettor rebuild kit to fit Weber 40 DCOE - the kit covers 2 carburettors.
Carburettor rebuild kit to suit Weber 45 DCOE - the kit covers 2 carburettors
Carburettor rebuild kit to suit Weber 40 DCOE - the kit covers 2 carburettors
Short vertical throttle rod (the threaded rod of the central adjuster is 45 mm) fitting between the carburettors on 101 and 105 series twin-carburettor cars. Includes metal ends and spring...
Fuel tank breather seal, 750 and 101 series Spider.
Throttle return spring, will fit all 750 and 101 series Normale cars. NOT suitable for any Veloce, SS or SZ models.
750 and 101 series Spider fuel filler opening grommets - sold as a pair (2 required per car).
Fuel tank sender unit gasket to fit all 105/115 series fuel tanks - including late fuel-injected cars and Montreals.
Rubber seal to fit the original bayonet fuel filler caps on 750, 101 and 105 series cars. Dimensions: outside diameter 57 mm and inside diameter 39 mm.
New gasket for the top jet cover on all Weber DCOE carburettors.
Genuine Weber top jet cover to fit all Weber DCOE carburettors. See item code FL071/1 for the matching cover gaskets.
Inner fuel union seal to fit all Weber DCOE carburettors. This seal sits between the union and the carburettor body.
Gasket kit (including needle valve + diaphragm) for 2 SOLEX 40 ADDHE 32 carburettors (notched boss)
