Mechanical clutch release bearing retaining clip

Mechanical clutch release bearing

Mechanical/cable clutch release bearing to fit the clutches of 750, 101 and early 105 series cars. Original design

Mechanical clutch release bearing retaining clip

Retaining clip required to fit the release bearing. Two required per car.

Mechanical clutch friction plate

Mechanical clutch friction plate to fit 750, 101 and early 105 series cars.

Mechanical clutch pressure plate

Mechanical clutch pressure plate to fit 750, 101 and early 105 series cars.

Clutch pedal arm pivot bush 750 & 101 series

Bush for the bottom of the clutch pedal arms on 750 and 101 series cars. Dimensions OD - 20 mm, ID - 8 mm, width - 19 mm. May require slight trimming to fit some pedal arms.

Gear lever gaiter for Alfetta & Giulietta, GTV (116)

Fast road uprated early mechanical clutch kit

FAST ROAD mechanical/cable clutch kit suitable for all mechanical clutch cars; it replaces the conventional mechanical clutch. Features an uprated F&S pressure plate and release bearing and a...

Mechanical clutch friction plate - F&S

Genuine Fitchel & Sachs mechanical/cable clutch friction plate to fit 750, 101 and early 105 series cars.

Clutch pedal return spring for 750 & 101 series

Clutch pedal return spring, will fit all 750 and 101 series cars.

Uprated early mechanical clutch kit

Mechanical/cable clutch kit suitable for all mechanical clutch cars; it replaces the conventional mechanical clutch. Features an uprated F&S pressure plate and release bearing and a...

Mechanical clutch release bearing

Genuine Fitchel & Sachs mechanical/cable clutch release bearing to fit the clutches of 750, 101 and 105 series cars.

Pedal box rubber seal

Pedal box rubber seal, fits all 750 and 101 cars. Fits around the floor opening.

Pedal box spacer plate 750 & 101 series

Pedal box spacer plate, all 750 and 101 cars. Stainless steel, includes fixing bolts. The master cylinder is not ideally positioned right next to the exhaust downpipes or manifold, even if a heat...

Release bearing adaptor for mechanical clutch

Release bearing adaptor for 750/101 and 105 cars. This adaptor is designed to allow a 1750/2000 engine and clutch to be used in 750, 101 and 105 models with a mechanical clutch. The car retains the...