Fuel tank sender unit gasket for all 750/101/105/115
Fuel tank sender unit gasket to fit all 105/115 series fuel tanks - including late fuel-injected cars and Montreals.
Active filters
Fuel tank sender unit gasket to fit all 105/115 series fuel tanks - including late fuel-injected cars and Montreals.
750 and 101 series Spider fuel filler opening grommets - sold as a pair (2 required per car).
Throttle return spring, will fit all 750 and 101 series Normale cars. NOT suitable for any Veloce, SS or SZ models.
Fuel tank breather seal, 750 and 101 series Spider.
Short vertical throttle rod (the threaded rod of the central adjuster is 45 mm) fitting between the carburettors on 101 and 105 series twin-carburettor cars. Includes metal ends and spring...
Rubber seal to fit the original engine-bay Fispa fuel filter/pressure regulator unit fitted to 750, 101 and 105 series cars. This filter unit uses the smaller FL005 filter, 3.3 cm in diameter....
Carburettor rebuild kit to suit Weber 40 DCOE - the kit covers 2 carburettors
Carburettor rebuild kit to suit Weber 45 DCOE - the kit covers 2 carburettors
Complete carburettor rebuild kit to fit Weber 40 DCOE - the kit covers 2 carburettors.
New-production fuel tank to suit 750 and 101 series Spiders. Well remade in stainless steel with correct-style outlets.
Pair of original-style felt strips to fit between the fuel tank and the support straps on all 750 and 101 series cars.
New metal fuel tank support strap to fit all 750 and 101 series cars. End-to-end length, 785 mm. Sold individually, two used per car. Not suitable for SS and Spider Veloce models.
Bush for the bottom of the carburettor support arm on 750 and 101 series Veloce cars.
New genuine Weber 36 DCD Type 14 downdraught carburettor. A popular replacement for the Solex carburettor originally fitted to 750 & 101 Series Normale and 105 Giulia Ti cars.
Adaptor plate to allow a standard air filter housing to be fitted. ** SUITABLE FOR 101 GIULIA ONLY ** IF FITTED TO A 1300 CAR, YOU MAY HAVE CLEARANCE PROBLEMS WITH THE BONNET.
Single-carburettor air box strap. fitted to 750 and 101 cars.
Fuel sender cover to fit the boot floor of the Giulietta/Giulia Sprint & Spider 750 & 101.
Air intake hose for 101 Series 1600 Spider Normale cars. 60 mm diameter and 310 mm long. Sold individually - two required per car.
Plastic mounting spacer to suit mechanical fuel pumps mounted on the engine front timing cover.
Aluminium blanking plate to seal the mechanical fuel pump mounting on carburettor-equipped 101, 105, 116 and 75 models.
Aluminium blanking plate to blank off the mechanical fuel pump mounting on 101 and 105 series cars with cartridge oil filter.
Gasket fitting between the engine block and the angled fuel pump mounting on 101 & 105 models
Thackery washer, carburettor mounting. 5/16 - M8 fitting.
Fuel pump for Alfa Romeo 105 and 116 series cars, with one horizontal and one vertical outlet. It is supplied with its 2 gaskets. This version was rarely fitted as original equipment: check the...
Rubber carburettor mounts to fit 750 series Veloce engines.
Complete carburettor overhaul kit to fit the Solex 32 PAIA downdraught as fitted to Normale cars from the late 1950s.
Complete overhaul kit for the Solex APAI-G downdraught carburettor fitted to some 750 and 101 series "Normale" cars.
Complete overhaul kit for the Weber 40 DCO3 carburettor. Originally fitted to 750 veloce cars. The kit contains: Needle valve size 175. Top cover gasket. Jet cover gasket. Base gaskets. Washers. 3...
Spindle for Weber 40 DCO3 carburettor. Originally fitted to 750 Veloce cars.
Fuel pump overhaul kit for 750 series cars. Cars with cylinder head-mounted Fispa pump.
Fuel tank sender unit for 750 and 101 series cars.
A. Salamini & Co. radiator sticker, measuring 52 mm X 21 mm (at the centre)
Set of 25 original-style hose clamps (9 mm wide band) as used on Alfas (and Ferraris, Maseratis and other Italian cars) in the 1950s and 1960s.
Medium (25-35 mm) stainless steel hose clamp/jubilee clip for general use on heater hoses, etc.
Stainless steel hose clamp/jubilee clip for general use on coolant hoses, etc
Large (45-60 mm) stainless steel hose clamp to fit larger hoses such as the upper radiator hose at the inlet manifold joint on early 105 series cars.
Small (13-20 mm) stainless steel hose clamp/jubilee clip for general use on heater hoses, etc.
Water pump repair kit for 750 and 101 series 1300 cars
Water pump gasket fitted to 750 and 101 Series 1300 engines.
Water pump fitted to 750 and early 101 series 1300 engines. Please compare the image with your original water pump before ordering, as Alfa Romeo had two variants of water pump, but only this type...
Water pump (2 outlets) to fit 101 series 1600 engines and 105 series cars fitted with dynamos/generators.
In-line tube-style thermostat to fit 750 and 101 series Veloce engines, also used on early 750 Normale cars.
Water pump gasket for 1300cc 750 & 101 Series engines, 1900 engines, 102 Series 2000 engines and 106 Series 2600 engines.
Heater tap for 750, 1900 and 101 series cars up to 1960. It also fits many Ferraris, Maseratis and some Lamborghinis (including the Miura).