Complete valve spring kit - standard
Standard valve spring set for all 101, 105, 116 and 75 4-cylinder engines, including TS.
Active filters
Standard valve spring set for all 101, 105, 116 and 75 4-cylinder engines, including TS.
Valve spring lower cup washer. For 101, 105, 116, 75 4-cyl and TS engines
A pair of "half-moon" rubber seals for the rear of the camshaft housing at the back of the cylinder head on 105, 116 and 75 4-cylinder engines.
Set of six "washers" (four fibre, two aluminium) for the cam/valve cover retaining bolts on all 101, 105, 116 and 75 engines (except Ts and V6).
Lightweight hollow billet camshaft, 11.2 mm lift with 284 degrees duration at 0.30 mm tappet clearance (253 degrees at 1 mm lift)
Lightweight hollow billet camshaft, 10.8 mm lift with 285 degrees duration at 0.30 mm tappet clearance (254 degrees at 1 mm lift). Designed by Jim Evans, UK Alfa competition engine builder whose...
Bolt to secure the cam cover on all 101, 105 and 106 series twin-cam cars.
Cylinder head flange nut for early 750 and 101 series cars. Also occasionally found on some early 105s.
Valve guide which can be adapted (requires shortening) to suit inlet or exhaust valves on 750 series engines with 8 mm valve stems.
Set of 8 cam followers to fit 750 series engines.
Set of 8 valve springs (8 inner + 8 outer) for 750 series engines.
34 mm exhaust/inlet manifold stud to fit all 101, 105, 116 4-cylinder engines
Exhaust manifold nut for 101, 105, 116 and 75 engines, including V6.
Standard timing chains can stretch and wear under high load, with a consequent effect on engine performance. German-made Iwis competition timing chains are specially manufactured with highly...
Cylinder head stud for 1300cc 750/101 Series engines - 230mm long.
Crankshaft front pulley bolt lock tab. For 101 series cars
Oil filler cap - metal bayonet type, fits most Nord twin-cam engines and 2600 models.
Valve collet for 750 series engines. Sold as a pair (two halves). 8 required per car.