€132.50 tax excl.
Secure payment
Secure payment by bank card, PayPal, cheque or bank transfer
Shipped within 48 hours (excluding vehicles)
Contact us for shipping glass parts (windscreens or windows)
Customer service available from 9am to 5pm
16 other products in the same category:
Set of 4 metal and rubber rear suspension spring seats to fit 750 and 101 series cars with the larger 115 mm OD rear springs.
Set of 4 slightly uprated lowered springs for 750 and 101 series Sprint and Spider. Lowers the car by approximately 35 to 40 mm. Ideal for road use.
Suspension rebound strap fitting kit. To suit all 750 and 101 series cars. One kit does one strap.
Superflex polyurethane front shock absorber lower bush. The price is for a pair of bushes. We recommend Superflex as they use only very high-quality TDI polyurethane, unlike the NDI polyurethane...
34 mm diameter rear suspension trailing arm bush to fit 750 series cars. 4 required per car. Also fits the rear suspension of some 102 series models and some 106 series 2600 cars, and the rear...
Dust cover for the large ball joint in the front suspension lower wishbone as well as the ball joint on the rear suspension A-arm on all 750 and 101 series cars.
This bush has two applications - Fits early front anti-roll bars (pre-1968 cars) (with curved links) 2 per car. 750/101/105 series cars. Fits the rear anti-roll bar on all cars fitted with a rear...
Standard rear spring for all 750 and 101 series cars. Sold individually; however, we strongly recommend replacing springs in pairs.
Rear half-shaft oil seal to fit 1300, 1600 and 1750 rear axles with the smaller-diameter half-shafts used up to approximately 1974. Also fits 750 and 101 series rear axles.
Original-style canvas rear axle check strap to fit all 750 and 101 series cars.
Rear suspension bush - rear axle - 52mm - Alfa Romeo 101 - 102 - 106 series
Classic Alfa reinforcement kit for the rear axle trailing arm brackets to fit all 750 and 101 series cars. This is an essential modification for anyone considering rallying or racing a Giulietta....
Rear wheel bearing kit - bearing and oil seal - for 1300, 1600 and 1750 cars up to approximately 1974. Not suitable for the 2000-style limited-slip rear axle as it has larger-diameter half-shafts....
Standard rear shock absorber for all 750 and 101 series cars.
Set of 11 dust boots to fit all ball joints and track rod ends on all 750/101 cars. Covers 6 track rod ends, 4 front suspension ball joints and 1 rear suspension ball joint.
error Your review appreciation cannot be sent