- New
€1.84 tax excl.
Main bearing cap retaining nut for all 4-cylinder twin cam engines.
Secure payment
Secure payment by bank card, PayPal, cheque or bank transfer
Shipped within 48 hours (excluding vehicles)
Contact us for shipping glass parts (windscreens or windows)
Customer service available from 9am to 5pm
Crankshaft main bearing cap nut, for all 4-cylinder engines: Giulietta / Giulia 750-101, GT Bertone, Spider 105/115, Giulia Berlina, Alfetta and 75.
16 other products in the same category:
Upper sump for 105 series Nord 1300, 1600, 1750 and 2000 engines: GT Bertone, Spider 105/115, Giulia Berlina and Junior Zagato. Not suitable for cars with the dipstick located in the sump.
Fitting advice: When fitting the pump, tighten it in place (but not fully), then put your finger inside the front cover (or insert a screwdriver into the distributor mounting hole) and rock the oil...
1 mm thick spacer plate fitted between the engine block and the bellhousing, generally on GT Bertone, Spider 105/115 and Giulia Berlina with hydraulic clutch from 1968 to 1975. Compare carefully...
Aluminium blanking plate for the cable-driven rev counter take-off, for use when converting to an electronic rev counter. Suits Giulia 101 1600, GT Bertone, Spider 105/115, Giulia Berlina and...
Oil level dipstick, length 495 mm, for 105 series 1750 and 2000 engines fed by carburettors (GT Bertone, Spider 105/115, Giulia Berlina). Not suitable for fuel-injected engines. After replacing the...
Stud screwed into the rear of the block to secure the gearbox bellhousing on all 105 twin cam engines with hydraulic clutch: GT Bertone, Spider 105/115, Giulia Berlina, Junior Zagato, as well as...
Stainless steel plate mounted on the main bearing caps and sump fixing points, for 1300, 1600 and 1750 engines (GT Bertone, Spider 105/115, Giulia Berlina, Junior Zagato). It stiffens the block of...
Oil level dipstick, length 456 mm, for 105 series 1300 and 1600 engines (GT Bertone, Spider 105/115, Giulia Berlina). After replacing the dipstick, check the level by pouring in a measured quantity...
error Your review appreciation cannot be sent