Giulia & Giulietta 750/101
Giulia & Giulietta 750/101 There are 1053 products.
Active filters
123 Ignition electronic distributor Giulia, Bertone, Spider, Alfetta GTV, Berlina, 75 except Twin...
The high-performance coil must be fitted in place of your original one. Its reference is MPI05788 The distributor is supplied with fitting and adjustment instructions and installs in less than 10...
Voltage regulator for 105 and 101 series
Reproduction early-style voltage regulator to fit all 105 series cars with dynamos/generators as well as 101 series cars.
Layshaft rear bearing - cars with mechanical clutch
Layshaft rear bearing to fit 105 series mechanical clutch cars. Also fits 5-speed 101 series, late 102 series and all 2600s (106 series). Outside diameter - 62mm Inside diameter - 30 mm...
Layshaft intermediate bearing
Layshaft intermediate bearing for 101 and 105 series gearboxes Also fits late 102 series and all 2600s (106 series).
Layshaft front bearing
Layshaft front bearing (inside diameter 25 mm, outside diameter 52 mm, width 20.6 mm) to fit mechanical clutch and some hydraulic 105 series gearboxes. Also fits 101 series, late 102 series and...
Gearbox synchro ring - 101/750 series - 2000 - 2600
Synchro ring - grooved type for early gearboxes, to fit 750, 101, 102, 106 (2600) and early 105 series gearboxes.
Rev counter/speedometer cable 1.85m
1.85M long. Used as the speedometer cable on LHD cars and as the rev counter/tacho cable on RHD cars. Fits all 750, 101, 105 series cars. Check the length of your old cable!
Speedometer cable - for all 105 series RHD
Speedometer cable for all right-hand drive 105 series cars. 2.0 m long, it will also fit 750 and 101 series cars if required.
Rev counter cable for 105 series LHD
Rev counter/tacho cable for left-hand drive 105 series cars. At 1.55 m long, it will also fit some 750 and 101 series cars.
Trip reset cable for all car types
Instrument reset cable for Giulia, Giulietta (750 & 101) Sprint-Spider-SS-Sz-Berlina; Alfa 2000 (102) and 2600 (106) Sprint (NOT Spider) -Berlina; Alfa Montreal; Giulia (105)...
Bonnet release cable Giulia Saloon 750 & 101
Bonnet release cable to fit Giulia saloons 1962 - 1978 as well as all 750 and 101 series cars.
Pirelli Cinturato 55HR15 tyre
The Pirelli Cinturato was introduced in the 1950s and was the first example of a textile-belted radial tyre. The Pirelli Cinturato quickly became the dominant radial tyre in European GT and sports...
Pair of 8mm wheel spacers for 750/101/105 series
Pair of 8 mm wheel spacers for all 750/101 and 105 series cars.
Pair of 5mm wheel spacers for 750/101/105 series
Pair of 5 mm wheel spacers for all 750/101 and 105 series cars.
Front wheel stud
Front wheel stud - right-hand thread - to fit 750, 101 and 105 series cars. Length = 55mm (excluding head).
Front wheel stud
Front wheel stud - left-hand thread - to fit 750, 101 and 105 series cars. Length = 52mm (excluding head).
GTA wheel nut - polished stainless steel - left-hand thread
Our own production of GTA wheel nuts in the correct original style. Highly polished stainless steel - superb finish, with left-hand thread. Perfectly matches our GTA replica wheels. Also fits the...
GTA wheel nut - polished stainless steel - right-hand thread
Our own production of GTA wheel nuts in the correct original style. Highly polished stainless steel - superb finish, with right-hand thread. Perfectly matches our GTA replica wheels. Also fits our...
22mm brass open wheel nut - left-hand thread
22mm open wheel nut - left-hand thread, in brass as the original type. This is a left-hand thread.
22mm brass open wheel nut - right-hand thread
22mm open wheel nut - right-hand thread, in brass as the original type. This is a right-hand thread.
22mm open wheel nut - left-hand thread
22 mm open wheel nut - left-hand thread in unpolished stainless steel. This is a left-hand thread. Also ideal for competition cars requiring open wheel nuts.
22mm open wheel nut - right-hand thread
22 mm open wheel nut - right-hand thread in unpolished stainless steel. This is a right-hand thread. Also ideal for competition cars requiring open wheel nuts.
Battaini jack plastic cap
New production at a new attractive price. Plastic top to fit on top of the jack in most 105 series coupés and Spiders and some 101 series cars. Suits jacks with a top diameter of approximately 45...
Stainless steel Giulietta hubcap
Polished stainless steel hubcap for all 750 and 101 series cars with black and silver centre badge. Small rear opening to suit the spring clips mounted near the wheel stud holes.
